Repower & Engine Replacement
Expert engine repowering for vessels, vehicles, and industrial equipment. From outboard swaps to full diesel inboard repowers and crate engine conversions — we supply, engineer, and install the right power solution for your application.
🔄 Repower Options
New Engine Repower
Factory-fresh engine with full manufacturer warranty, latest emissions compliance, and zero-hour reliability.
- 3–5 year manufacturer warranty
- Latest EFI or common-rail technology
- Lowest emissions, best fuel economy
- Full dealer support and parts availability
- Highest resale value for your vessel
Reconditioned Engine Repower
Professionally overhauled engine with new wear components, compression testing, and 12-month dealer warranty.
- 30–50% lower cost than new
- 12-month Green Boat Engines warranty
- New pistons, rings, bearings, gaskets, seals
- Compression and leak-down tested
- Ideal for budget-conscious operators
Crate Engine Conversion
Automotive or industrial crate engine adapted for marine or industrial use with marinization kit.
- High horsepower per dollar
- Wide selection of LS, BBC, SBC, Cummins
- Custom marinization available
- 2-year warranty on internally lubricated parts
- Popular for performance builds and customs
Remanufactured Exchange
Factory-remanufactured engine from the OEM, built to original specifications with core exchange.
- OEM warranty (2–3 years typical)
- Built on factory assembly line
- Core exchange credit reduces cost
- Same reliability as new at lower price
- Available for Volvo Penta, Yanmar, Perkins
🚤 Outboard Repowering
Swapping an old outboard for a modern unit is the single most cost-effective upgrade for most boats under 40 feet. We handle transom assessment, engine selection, rigging, controls, and sea trial.
Transom Compatibility
Not every new engine fits every old boat. We measure transom height, width, and structural integrity to confirm your chosen horsepower and shaft length will mount safely. Transoms weakened by rot, corrosion, or previous stress fractures must be reinforced before repowering.
Horsepower Rating
Your boat's capacity plate specifies maximum horsepower. Exceeding this rating voids insurance and risks hull failure. We verify the hull's CE or NMMA rating and recommend the optimal horsepower within safe limits — often the maximum rated power for best performance and resale.
Weight Considerations
Modern 4-strokes are heavier than old 2-strokes. A 150 HP 2-stroke from 1995 may weigh 180 kg; a modern 150 HP 4-stroke EFI can weigh 220 kg. Extra weight on the transom changes trim, steering effort, and planing attitude. We calculate the impact and recommend trim tab or hydrofoil solutions if needed.
Controls & Rigging
Old cable controls rarely mate to modern electronic throttle systems. We replace control cables, steering, and instrument harnesses as part of the repower package. Digital gauges, trim indicators, and NMEA 2000 integration are standard on our installations.
⚓ Inboard Diesel Repowering
Inboard repowering is a major engineering project involving engine beds, transmission alignment, shaft coupling, exhaust, cooling, fuel, and electrical systems. We manage the entire project from removal to sea trial.
Engine Bed Fabrication
New engines rarely match old bed bolt patterns. We fabricate new engine beds from marine-grade aluminum or steel, glassed into the hull with proper load distribution. Beds must support the engine statically and dynamically without flexing or transmitting vibration to the hull.
Transmission Matching
The new engine's SAE flywheel housing, torsional characteristics, and power curve must match the existing transmission or a new transmission must be sourced. We perform torsional vibration analysis to ensure the crankshaft and gearbox input coupling are compatible. See our Transmissions FAQ for details.
Shaft & Propeller
A new engine may turn a different RPM range, requiring a new propeller or shaft diameter. We calculate the required propeller diameter, pitch, and blade count based on the new engine's power curve, gearbox ratio, and hull characteristics. Shaft alignment is verified with a dial indicator to 0.001" per inch of diameter.
Exhaust & Cooling
Modern diesels run higher exhaust temperatures and require larger wet exhaust risers. Cooling systems must be recalculated for the new engine's BTU output. We design and install the complete exhaust and cooling system, including raw-water strainers, seacocks, and heat exchangers.
🔧 Crate Engine Conversions
Crate engines offer exceptional horsepower per euro for custom builds, performance vessels, and industrial repowering. We supply and marinize crate engines from LS-series V8s to Cummins inline-6 diesels.
Marine V8 Conversions
LS-based 5.3L, 6.0L, and 6.2L crate engines marinized for jet boats, ski boats, and performance craft.
- Wet exhaust manifolds and risers
- Closed cooling with heat exchanger
- Marine starter, alternator, and fuel pump
- Custom camshaft for marine torque curve
- Transmission or V-drive mating
Industrial Repowering
Cummins 6BT, 4BT, and CAT 3056 crate engines for generators, pumps, compressors, and workboats.
- SAE #3 or #2 flywheel housing
- Industrial or marine duty rating
- Custom control panel and governor
- PTO shaft and hydraulic pump drive
- Full exhaust and cooling integration
💶 Repower Cost Guide
Prices are starting points for supply and installation. Final quotes depend on vessel condition, access, existing system compatibility, and travel distance.
| Repower Type | Starting From | Typical Duration | What's Included |
|---|---|---|---|
| Outboard Repower (up to 30 HP) | €2,800 | 1 day | Engine, controls, fuel, electrics, prop, sea trial |
| Outboard Repower (40–90 HP) |
